The screen requires constant 12 volts together with ignition switched 12v from the car in order to switch on. If the screen does not power on, it will be down to one of these feeds. Power going to the screen can be tested by unplugging the 4 pin plug on the power loom and probing […]
Hard Reset Guide In the event of a failed software update – you will need to manually trigger the IDCORE box to retry the update process following the steps below – for the best results, ensure you are using an approved IDCORE flash drive (available here IDCORE USB Flash Drive for Software Update – Unique […]
Below instructions show how to enter music mode on IDC-JLRBSC system NOTE – when music mode is engaged, voice prompts cannot be heard through bluetooth streaming, you can only hear music. Ensure your phone is connected via bluetooth to the factory fitted radio and that bluetooth music streaming is enabled. Once connected, your phone should […]
Select Set Up from Main Menu Enter Smart Phone Menu Select Android Device Select Auto Link to enable mirroring Download the Auto Link app from the google play store here Connect your Android device via original USB cable and launch the Auto link app on your phone.
Reverse Camera Connection Guide Ensure OEM menu and IDCORE interface menu displays/operates correctly before installing any aftermarket camera. Vehicles with Automatic transmission* * Exceptions – automatic transmission for IDC-B8MMIC (A4/A5 with MMI Basic, A6 C6 with MMI basic), IDC-MMI2G for all car models, IDC-D5C (2015-2016 XE/2015-2016 Discovery Sport/F-Type), IDC-ICTP8 doesn’t apply to the automatic transmission […]
Please follow the below guide to update software on your interface box. Only install software packages sent and verified compatible by our team. We will not be held responsible for any problems due to incorrectly applied updates or updates from third party sources. If incorrect updates applied there is a risk of damaging the product. […]